Athletic TEAM Lockers
Varsity
Designed with the athlete in mind, Varsity single tier lockers are highly recommended for varsity team rooms. Varsity lockers are engineered to withstand excessive abuse. These lockers are also excellent in combination with PE lockers.
Jr Varsity
Jr Varsity double tier athletic lockers are ideal when budget or space limitations apply. Double tier lockers can be used in team rooms as well as in PE rooms in combination with PE Lockers.
Intramural
Intramural triple tier athletic lockers are ideal when space and/or funds are limited. The opening height allows clothing to hand on hooks allowing better ventilation than smaller PE lockers. Intramural lockers are also ideal for use in combination with PE lockers.
- Fully-framed all-welded construction
- 14 gauge diamond perforated doors
- New deep-drawn seamless stainless steel recessed handle
- Rugged 11 gauge latch hooks with riveted on bumper MIG welded to Hollow-T frame
- Gravity lift-type multi-point spring loaded latching welded to Hollow-T frame
- Gravity lift-type multi-point spring loaded latching
- 3-point latching for openings 48" high and higher
- 2-point latching for openings 20" high thru 36" high
- Heavy-duty 13 gauge 7-knuckle 3-1/2" hinges
- 3-hinges per opening 48" high and higher
- 2-hinges per opening 20" high thru 36" high
- 13 gauge fully-framed 1/2" flattened expanded metal sides
- 16 gauge continuous top
- 16 gauge galvanneal hat shelf for Varsity openings 60" and 72" high
- 16 gauge galvanneal bottom and intermediate shelves
- 18 gauge solid back
All-Star SPORT Lockers
All-Star MVP lockers feature our exclusive Hollow-T framing system, expanded metal sides for maximum ventilation and interlocking body components creating a functional yet sturdy sports locker guaranteed in writing to last a lifetime.
The versatility of our Hollow-T framing system allows you to customize a locker to meet your specific requirements.
All-Star MVP Locker Features
- Fully-framed all-welded construction
- 13 gauge fully-framed 1/2" flattened expanded metal sides
- 16 gauge continuous top
- 16 gauge galvanneal hat shelf
- 16 gauge galvanneal bottom shelf
- 18 gauge solid back
- Upper Options
- Wallet Security Box 7-1/4" wide x 9" deep x 7-1/4" high
- 12" wide side hinged security box
- Full-width top hinged security compartment Standard 14 gauge with Security-Plus Ventilated door
- Stainless Steel Coat Rod
- Lower Options
- Lower Seat/Shelf
- Foot locker
All-Star MVP Sport Locker Sizes
- Widths 12", 15", 18", 24", 30", 33", 36"
- Depths 12", 16", 18", 22"
- Nominal Column Heights 60", 72", 84"
Notes:
- Actual locker column height is 2-3/4" over nominal column heights shown for 60" and 72" models. 84" high models will be 84" actual.
- All-Star MVP lockers will ship in multiple column units up to 60" wide to meet individual jobsite conditions.
Classic Wardrobe & Box Lockers
- Doors 20" high and higher
- Knock-down (KD) construction
- 24 gauge solid body components
- 16 gauge continuous piano hinges
- Continuous vertical door strike at both hinge and latch side
- All production KD lockers are supplied without legs unless otherwise specified
- 16 gauge louvered doors (18 gauge for 9" wide)
- 16 gauge horizontal frame cross member between doors of double and triple tier wardrobe lockers
- Deep-drawn 304 stainless steel recessed handle
- 12 gauge latch hooks MIG welded to frame
- Gravity lift-type multi-point spring loaded latching
- 3-point latching for openings 48" high and higher
- 2-point latching for openings 20" high thru 36" high
- Hat shelf for single tier openings 60" and 72" high
- Hooks
- 2-single hooks and 1-double hook is standard.
- 1-double hook only for triple tier 12" wide and wider
- 2-single hooks only for all 9" wide
- Single tier, double tier and triple tier availability
- 2-year warranty
- MAX Option upgrades all body components to 16 gauge with 18 gauge back
| SIZES | ||||
|---|---|---|---|---|
| Tier | Width | Depth | Opening Height | Frame Height |
| Single Tier | 9'' 12'' 15'' 18'' 24'' | 12'' 15'' 18'' 21'' 24'' | 36'' 48'' 60'' 72'' | 36'' 48'' 60'' 72'' |
| Double Tier | 9'' 12'' 15'' 18'' | 12'' 15'' 18'' 21'' 24'' | 30'' 36'' | 60'' 72'' |
| Triple Tier | 9'' 12'' 15'' | 12'' 15'' 18'' | 20'' 24'' | 60'' 72'' |
| Four Tier | 12" 15" | 12" 15" 18" | 15" 18" | 60" 72" |
| Five Tier | 12" 15" | 12" 15" 18" | 12" 14.4" | 60" 72" |
| Six Tier | 12" 15" | 12" 15" 18" | 12" | 72" |
Wood SPORT Lockers
The Recruiter Wood Sport Locker
Recruiter lockers are crafted of furniture grade red oak and finished using three coats of high grade cabinet lacquer. Red oak is naturally moisture and mildew
resistant so you can be sure to benefit from your
investment for years to come. Recruiter lockers are virtually unaffected by normal locker room conditions and are designed to stand up to daily use by today's athletes!
In addition to our standard stock designs and sizes,
our engineers are readily available to assist you in
custom designing a locker to meet your specific needs. Be it a fitness center, team locker room, country club or resort health spa, we stand behind our product with a full one year warranty that covers defects in materials and workmanship.
Features:
BODY CONSTRUCTION: Wood lockers shall be fabricated from ¾" plain sliced red oak plywood throughout including sides, backs and hat shelves.
BODY STYLES: Single tier
SIZES: 24" wide x 24" deep x 84" high
30" wide x 24" deep x 84" high
finish: All locker parts to be finished with a three coat catalyzed clear cabinet lacquer
TRIM: Face trim, shelf valances, seat front nosing, seat hinge support blocking and seat side support cleats are made from red oak lumber
SECURITY BOX DOOR: Made from red oak lumber
HINGES: Continuous in bright brass plating
HOOKS: Two double prong metal hooks
CLOTHES ROD: Made from KV 1-1/16" diameter chrome plated steel, 075" wall thickness
UPPER SHELF: Covered with Wilson-Art 7888-60 Golden Oak plastic laminate for durability
appearance: Color: Natural red oak
warranty: 1 year
Plastic Lockers
DuraTech™ solid plastic lockers are supplied by List Industries Inc®. These specifications will be regarded as minimum. Lockers constructed of other materials, including materials with a core and not of solid plastic, will not be acceptable. Locker doors and door frames shall be made from high impact, high density polyethylene (HDPE) formed under high pressure into solid plastic components 1/2" thick with homogeneous color throughout.
Sides, tops, bottoms, backs, and shelves shall be made from high impact, high density, polyethylene (HDPE) formed under pressure into solid plastic components 3/8" thick with homogenous natural color throughout. Components shall have machined edges to accept assembly brackets. Continuous latch shall be made from high impact HDPE plastic and capable of accepting various locking mechanisms. Latch shall be securely fastened to the entire length of the door, providing a continuous latch. Door hinge shall be made from heavy duty extruded aluminum with a powder coating to match the locker door and frame. Door hinge shall be full length assembled onto the door and front. Assembly brackets shall be full depth, width and height of the lockers. Brackets shall be made from PVC plastic and snapfit assembled onto locker sides, backs and tops. The snap-fit design offers a continuous connection between components. Coat hooks shall be two-prong and made from high impact plastic. Hooks shall be mounted to the bottom of the shelf one each per locker (Standard on Single, Double & Triple tier lockers only). All HDPE components shall have a smooth “orange peel” finish. Locker doors and door frames shall be of the same color and selected from the DuraTech™ full color line.
DuraTech Lockers Size Chart
Width x Depth |
36 in. Height |
48 in. Height |
60 in. Height |
72 in. Height |
12 x 12 |
1 tier |
1, 2 and 4 tiers |
1, 2, 3, 4 and 5 tiers |
1, 2, 3, 4 and 6 tiers |
12 x 15 |
1 tier |
1, 2 and 4 tiers |
1, 2, 3, 4 and 5 tiers |
1, 2, 3, 4 and 6 tiers |
12 x 18 |
1 tier |
1, 2 and 4 tiers |
1, 2, 3, 4 and 5 tiers |
1, 2, 3, 4 and 6 tiers |
15 x 12 |
1 tier |
1, 2 and 4 tiers |
1, 2, 3, 4 and 5 tiers |
1, 2, 3, 4 and 6 tiers |
15 x 15 |
1 tier |
1, 2 and 4 tiers |
1, 2, 3, 4 and 5 tiers |
1, 2, 3, 4 and 6 tiers |
15 x 18 |
1 tier |
1, 2 and 4 tiers |
1, 2, 3, 4 and 5 tiers |
1, 2, 3, 4 and 6 tiers |
18 x 12 |
1 tier |
1, 2 and 4 tiers |
1, 2, 3, 4 and 5 tiers |
1, 2, 3, 4 and 6 tiers |
18 x 15 |
1 tier |
1, 2 and 4 tiers |
1, 2, 3, 4 and 5 tiers |
1, 2, 3, 4 and 6 tiers |
18 x 18 |
1 tier |
1, 2 and 4 tiers |
1, 2, 3, 4 and 5 tiers |
1, 2, 3, 4 and 6 tiers |